GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .

  3. Object Number: 869668  Size: SH
  4. Disconnect the wiring connector from the wiper motor.
  5. Remove the fasteners attaching the wiper module to the plenum.
  6. Remove the wiper module assembly from the plenum.

Installation Procedure


    Object Number: 869668  Size: SH
  1. Install the wiper module assembly into the plenum.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fasteners attaching the wiper module assembly to the plenum.
  4. Tighten
    Tighten the fasteners to 10 N·m (89 lb in)

  5. Connect the wiring connector to the wiper motor.
  6. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  7. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .