Removal Procedure
- Pull out on the outer trim cover in order
to release the retaining fasteners.
- Slide the outer trim cover toward the rear of the vehicle.
- Disconnect the Door Switch electrical connector.
- Remove the Air Bag electrical connector from the outer trim panel.
- Remove the Door Switch from the outer trim
panel.
Installation Procedure
- Install the Door Switch into the outer trim
panel.
- Install the Air Bag electrical connector
to the blade on the outer trim panel.
- Connect the door switch electrical connector.
- Insert the tabs on the outer trim cover
onto the slots on the I/P.
- Align the retaining fasteners with the I/P.
- Push the outer trim in order to secure.