For 1990-2009 cars only
Removal Procedure
- Insert an awl into the hole located behind the knob just above the D-ring bolt.
- Lift the lower end of the knob inboard and pull to disengage the top of the knob.
Installation Procedure
- Place the top of the knob in position and push on the knob to install.
- Lower the bottom end of the knob and push to engage the lower end. Snap into place.
- Press on the square area to raise and lower the seat belt webbing.
- Verify that the knob is locked in place by trying to move the knob without pressing on the square area.
