Removal Procedure
- Disconnect the negative battery cable (2). Refer to
Battery Negative Cable Disconnection and Connection
.
- Loosen the positive battery cable (1) bolt.
- Remove the positive battery cable from the battery.
- Remove the battery vent tube from the battery and grommet.
- Remove the battery retainer bolt.
- Remove the battery strap and retainer.
Important: Do not tip the battery more than 40 degrees during removal.
- Remove the battery.
Installation Procedure
Important: Do not tip the battery more than 40 degrees during battery installation.
- Install the battery.
- Install the battery strap and retainer.
Notice: Refer to Fastener Notice in the Preface section.
- Install the battery retainer bolt.
Tighten
Tighten the bolt to 18 N·m (13 lb ft).
- Install the battery vent tube to the battery and grommet.
- Position the positive battery cable (1) to the battery.
- Tighten the positive battery cable bolt.
Tighten
Tighten the bolt to 17 N·m (13 lb ft).
- Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.