Draining Procedure
- Remove the left front wheel. Refer to
Tire and Wheel Removal and Installation
.
- Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Clean away all dirt and debris from the transmission fluid drain plug area.
- Remove the drain plug.
- Allow the system to drain.
Notice: Refer to Fastener Notice in the Preface section.
- Install the transmission fluid drain plug, using pipe sealant on the plug threads.
Tighten
Tighten the transmission fluid drain plug to 38 N·m (28 lb ft).
Filling Procedure
- Clean away all dirt and debris from the transmission fluid fill plug area.
- Remove the transmission fluid level check plug.
- Fill the transmission with the proper fluid until even with the bottom of the fill plug hole. Refer to
Lubrication Specifications
for fluid recommendation.
- Install the level check plug.
Tighten
Tighten the level check plug to 38 N·m (28 lb ft).
- Install the left front wheel. Refer to
Tire and Wheel Removal and Installation
.