Removal Procedure
- Remove the air cleaner outlet resonator. Refer to
Air Cleaner Outlet Resonator Replacement
.
- Disconnect the manifold absolute pressure (MAP) sensor harness connector.
- Remove the MAP sensor (2) from the intake manifold.
Important: If the MAP sensor seal is damaged, the MAP
sensor must be replaced.
- Inspect the seal for damage.
Installation Procedure
Important: Use the new MAP sensor seal provided with
the new MAP sensor.
- Install the MAP sensor (2) into the intake manifold.
- Connect the MAP sensor harness connector.
- Install the air cleaner outlet resonator. Refer to
Air Cleaner Outlet Resonator Replacement
.