GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2006 🢒 ION 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Driver or Passenger Seat Belt Buckle Replacement

Driver or Passenger Seat Belt Buckle Replacement Non-Fold Flat

Removal Procedure

    Object Number: 875179 Size: SH
  1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the bolt from the seat belt buckle.
  3. Remove the seat belt buckle.

Installation Procedure

    Object Number: 875179 Size: SH
  1. Position the seat belt buckle between the adjuster and the seat.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt to the seat belt buckle.

    3. Tighten
    Tighten the bolt to 45 N·m (33 lb ft).

  3. Install the front bucket seat. Refer to Front Seat Replacement - Bucket .

Driver or Passenger Seat Belt Buckle Replacement Fold Flat

Removal Procedure

    Object Number: 875194 Size: SH
  1. Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
  2. Remove the bolt from the seat belt buckle.
  3. Remove the seat belt buckle.

Installation Procedure

    Object Number: 875194 Size: SH
  1. Position the seat belt buckle to the seat.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt to the seat belt buckle.

    3. Tighten
    Tighten the bolt to 45 N·m (33 lb ft).

  3. Install the front bucket seat. Refer to Front Seat Replacement - Bucket .