Removal Procedure
Important: Do NOT swap digital radio receivers between vehicles. Swapping digital receivers between vehicles will activate the digital radio Theftlock®, and "XM Theftlock®" will display.
- Remove the rear compartment trim panel. Refer to
Rear Compartment Trim Panel Replacement.
- Disconnect the wire connector (1).
- Disconnect the coaxial cables from the receiver.
- Remove the receiver from the bracket assembly.
Installation Procedure
- Install the receiver to the bracket assembly.
- Connect the coaxial cables.
- Connect the wire connector (1).
- Install the rear compartment trim panel. Refer to
Rear Compartment Trim Panel Replacement.
- Perform the setup procedure for the digital radio receiver. Refer to
Control Module References for programming and setup information.