GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 856911  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear tires and wheels. Refer to Tire and Wheel Removal and Installation .
  3. Remove the rear bumper fascia to rear wheelhouse liner screw.
  4. Remove the rocker panel to rear wheelhouse liner retainers.
  5. Remove the rear wheelhouse liner to rear wheelhouse retainers.
  6. Remove the rear wheelhouse liner from the vehicle.

Installation Procedure


    Object Number: 856911  Size: SH
  1. Install the rear wheelhouse liner to the vehicle.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screws that secure the rear bumper fascia to the rear wheelhouse liner.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  5. Install the rear tires and wheels. Refer to Tire and Wheel Removal and Installation .
  6. Lower the vehicle.