Removal Procedure
- Remove the license plate screws and the license plate.
- Remove the rivets attaching the license plate bracket to the front fascia.
Installation Procedure
- If this is a first-time installation, complete the following steps:
| 1.1. | Install a drill stop on a 5-mm (13/64-in) drill bit in order to ensure
that the bit does not penetrate the front fascia more than 13 mm (0.5 in). |
| 1.2. | Using a license plate bracket as a template, drill 2 5-mm (13/64-in)
middle mounting holes through the front fascia. |
| 1.3. | Install the rivets in the 2 middle mounting holes of the license
plate bracket. |
| 1.4. | Using a license plate bracket as a template, drill 1 5-mm (13/64-in)
upper mounting hole through the front fascia. |
- Install the rivets in the upper mounting hole of the license plate bracket.
- Position the license plate to the bracket. Install the license plate retaining
screws.
