GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 874895  Size: SH
  1. Open the front and rear doors.
  2. Remove the upper striker trim cover. Refer to Rear Side Door Latch Striker Cover Replacement .
  3. Gently pull the headliner down in the area of the striker to gain access to the attachment bolts.
  4. Mark the location of the upper striker.
  5. Remove the upper striker bolts.
  6. Remove the upper striker and spacers.

Installation Procedure


    Object Number: 874895  Size: SH
  1. Position the upper striker to the roof rail. Loosely install the fasteners.
  2. Slide the spacers into position between the striker and the roof rail.
  3. Align the striker to the position marked during removal.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Tighten the upper striker bolts.
  6. Tighten
    Tighten the lower striker bolts to 25 N·m (18 lb ft).

  7. Install the upper striker trim cover. Refer to Rear Side Door Latch Striker Cover Replacement .
  8. Close the front and rear doors.