GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2006 🢒 ION 🢒 Body 🢒 Interior Trim 🢒 Roof Rail Seat Belt Webbing Trim Bezel Replacement

Removal Procedure

    Object Number: 892688 Size: SH
  1. Remove the anchor bolt from the front seat belt.
  2. Remove the seat belt webbing from the front seat head restraint webbing guide.

    3. Object Number: 888387 Size: SH
  3. Remove the door striker trim by pulling on the trim.
  4. Remove the weatherstrip in the bezel area.

    5. Object Number: 876509 Size: SH
  5. Remove the webbing trim bezel outboard by sliding the bezel from the headliner.
  6. Slide the trim bezel off of the seat belt webbing and remove the bezel from the vehicle.

Installation Procedure

    Object Number: 876509 Size: SH
  1. Route the seat belt webbing through the trim bezel.
  2. Slide the trim bezel into the slot in the headliner.
  3. Replace the weatherstrip.

    4. Object Number: 888387 Size: SH
  4. Position the door striker trim in the vehicle.
  5. Push on the trim to engage the trim clips.

    6. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 892688 Size: SH
  6. Install the seat belt anchor bolt.

    7. Tighten
    Tighten the bolt to 45 N·m (33 lb ft).

  7. Install the seat belt webbing in the head restraint webbing guide.