GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2006 🢒 ION 🢒 Body 🢒 Lighting Systems 🢒 Rear Door Jamb Switch Replacement

Removal Procedure
  1. Open the rear door.

    2. Object Number: 384957 Size: LH
  2. Remove the lower garnish molding from the center pillar. Refer to Center Pillar Lower Garnish Molding Replacement .
  3. Reach into the opening in the center pillar and pinch the tabs together on the door jamb switch (2). Remove the switch from the center pillar.
  4. Disconnect the electrical connector (1) from the door jamb switch.

Installation Procedure

    Object Number: 384957 Size: LH
  1. Connect the electrical connector (1) to the door jamb switch.
  2. Press inward on the door jamb switch (2) until fully seated in the hinge pillar.
  3. Install the lower garnish molding to the center pillar. Refer to Center Pillar Lower Garnish Molding Replacement .
  4. Close the rear door.