GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 891314  Size: SH
  1. Remove the front floor console upper trim plate. Refer to Front Floor Console Compartment Replacement in Instrument Panel, Gages, and Console.
  2. Disconnect the warning lamp switch electrical connector (2).
  3. Remove the warning lamp switch mounting screw (1).
  4. Remove the switch from the park brake lever assembly.

Installation Procedure


    Object Number: 891314  Size: SH
  1. Align the park brake warning lamp switch locating tab to the locating hole on the park brake lever assembly.
  2. Install the switch to the park brake lever.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the park brake warning lamp switch mounting screw (1).
  5. Tighten
    Tighten the screw to 3 N·m (27 lb in).

  6. Connect the park brake warning lamp switch electrical connector (2).
  7. Install the front floor console upper trim plate. Refer to Front Floor Console Compartment Replacement in Instrument Panel, Gages, and Console.
  8. Verify correct park brake warning lamp operation.