GM Service Manual Online
For 1990-2009 cars only

Rear Seat Cushion Replacement Coupe

Removal Procedure


    Object Number: 891338  Size: SH
  1. Remove the push-in fastener from the rear seat center console.

  2. Object Number: 873546  Size: SH
  3. Push rearward on the front edge of the seat cushion, then lift up to disengage the frame from the floor pan locking tabs.

  4. Object Number: 873779  Size: SH
  5. Lift the center console and push the seat belt buckles out from between the seat cushions and the console.
  6. Remove the rear seat cushion.

Installation Procedure


    Object Number: 873779  Size: SH
  1. Position the rear seat cushion in the vehicle.
  2. Lift the rear seat center console and pull the seat belt buckles through the pockets between the seat cushion and the console.

  3. Object Number: 873546  Size: SH

    Important: Ensure that the seat belt buckles are not trapped beneath the cushion.

  4. Install the rear seat cushion by pushing rearward and down until the cushion engages in the floor pan tabs.

  5. Object Number: 891338  Size: SH
  6. Push down on the center console.
  7. Install the center console push-in fastener.

Rear Seat Cushion Replacement Sedan

Removal Procedure


    Object Number: 873539  Size: SH
  1. Push rearward on the front edge of the seat cushion, then lift up to disengage the frame from the floor pan locking tabs.
  2. Remove the seat cushion from the vehicle.

Installation Procedure


    Object Number: 873539  Size: SH
  1. Position the rear seat cushion in the vehicle.
  2. Install the seat belt buckles in the slots at the rear of the seat cushion.
  3. Important: Ensure that the seat belt buckles are not trapped under the rear seat cushion.

  4. Push rearward and down on the front edge of the seat cushion until the frame engages in the floor pan locking tabs.