GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2007 🢒 ION 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Instrument Cluster Replacement

Removal Procedure

    Object Number: 877771 Size: SH
  1. Pull out on the accessory trim plate in order to release the retaining fasteners.

    2. Object Number: 877774 Size: SH
  2. Disconnect the accessory trim plate electrical connectors.

    3. Object Number: 877802 Size: SH
  3. Remove the screw retaining the cluster trim plate to the center trim panel.
  4. Lift up on the cluster trim plate to release the retaining fasteners.
  5. Remove the cluster trim plate.

    6. Object Number: 877777 Size: SH
  6. Remove the cluster screws

    7. Object Number: 877776 Size: SH
  7. Pull the cluster out and disconnect the electrical connector.
  8. Remove the cluster from the vehicle.

Installation Procedure

    Object Number: 877776 Size: SH
  1. Position the cluster in the vehicle and connect the cluster electrical connector.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 877777 Size: SH
  2. Install the cluster screws

    3. Tighten
    Tighten the cluster screws to 2.5 N·m (22 lb in).


    Object Number: 877802 Size: SH
  3. Align the cluster trim plate retaining fasteners with the center trim panel.
  4. Push on the outer edge of the cluster trim plate in order to secure the retaining fasteners.
  5. Install the screw retaining the cluster trim plate to the center trim panel.

    6. Tighten
    Tighten the cluster trim plate screw to 2.5 N·m (22 lb in).


    Object Number: 877774 Size: SH
  6. Connect the accessory trim plate electrical connector(s).

    7. Object Number: 877771 Size: SH
  7. Align the retaining fasteners with the I/P.
  8. Push on the outer edge of the accessory trim plate in order to secure the retaining fasteners.
  9. Refer to Control Module References for programming and setup information.