GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Notice: DO NOT apply paint or clear coat to the antenna. This will damage the function of the antenna, causing poor reception or loss of signal reception.

    Notice: Use care when removing and installing the headliner. If reusing the headliner lay the headliner down flat on a clean surface. Excessive bending will damage the headliner.

  1. Lower the headliner. Refer to Headlining Trim Panel Replacement .

  2. Object Number: 854868  Size: SH
  3. Disconnect the cables (4) from the antenna base (1).
  4. Remove the retaining nut (2).
  5. Remove the antenna base (1) from the top of the roof.

Installation Procedure


    Object Number: 854868  Size: SH
  1. Place the antenna base (1) to the roof opening.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the retaining nut (2).
  4. Tighten
    Tighten the nut to 3.5 N·m (30 lb in).

  5. Connect the antenna cables (4).
  6. Install the headliner. Refer to Headlining Trim Panel Replacement .