Illustration | Tool Number/ Description |
|---|---|
| 78-41-067 Sleeve Inner Driver |
| 83-90-114 Sleeve |
| 83-90-312 Drift, Bearing Race Input Shaft |
| 87-90-636 Pinion Fixture |
| 87-90-800 Drift, Differential Seal |
| 87-90-867 Input Shaft Bearing Ring |
| 87-91-121 Input Shaft Bearing Puller Ring |
| 87-91-188 Screw Press Support |
| 87-91-204 Output Shaft Bearing Race Sleeve |
| 87-91-220 Drift, Main Shift Rod Bushing |
| 87-91-261 Output Shaft Remover |
| 87-91-287 Puller |
| 87-91-295 Puller Arms, 300 mm |
| 87-91-303 Puller Arms, 150 mm |
| 87-91-311 Sleeve, Bearing Driver Shaft |
| 87-91-410 Output Shaft Protector |
| 87-91-428 Driver |
| 87-91-642 Puller, Basic |
| 87-91-972 Assembly Ring |
| 87-92-053 Companion Flange |
| 87-92-061 Millimeter Disc |
| 87-92-095 Weight (10 Kilograms) |
| 87-92-103 Output Shaft Assembly Tool |
| 87-92-129 Lifting Eye |
| 87-92-137 Bearing Race, Milled |
| 87-92-152 Input Shaft Bearing Puller |
| 87-92-178 Output Shaft Puller Ring |
| 87-92-202 Output Shaft Bearing Race Sleeve |
| 87-92-210 Support, Differential Bearing |
| 87-92-236 Support |
| J 7754-C Torque Wrench Beam Type |
| J 25031-A Three Jaw Puller |
| J 35616-C GM-Approved Terminal Test Kit |
| J 43483 Impact Driver 3/8 Inch |
| J 43707 Transaxle Support Fixture |
| J 43964 Engine Stand Fixture Adapter |
| J 44362 Input Shaft Support |
| SA9113T Axle Seal Installer |
| SA9120T Differential Bearing Installer |
| SA9133T Axle Seal Puller |
| SA9172G Ball Detent Handle |
| SA9179NE Dial Indicator |
| SA9211T-2 Fifth Gear Remover |
| SA9211T2-4 Thread On Adapter |
