Quarter Panel Upper Applique Replacement Coupe

1. Remove the front and rear roof moldings.
2. Remove the screws from the quarter panel applique.
3. Lift the applique from the slot in the quarter panel.

1. Position the applique into the slot in the quarter panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the screws to the quarter panel applique.

Tighten
Tighten the quarter panel applique screws to 2 N·m (18 lb in).

3. Install the front and rear roof moldings.