Rocker Panel Molding Support Replacement for Saturn ION 2007

1. Remove the rocker panel molding. Refer to Rocker Panel Molding Replacement .
2. Use a 7.5 mm (9/64 in) drill bit to drill out the rivets. Remove the support.
3. Using a telescoping magnet with a swivel head, remove the remaining rivets from inside the rocker cavity.

1. Install the locating rivet (1) to ensure proper fore/aft location.
2. Install the remaining rivets.
3. Install the rocker panel molding. Refer to Rocker Panel Molding Replacement .