GM Service Manual Online
For 1990-2009 cars only

This table identifies which serial data link that a particular module uses for in-vehicle data transmission. Some modules may use more than one data link to communicate. Some modules may have multiple communication circuits passing through them without actively communicating on that data link. This table is used to assist in correcting a communication malfunction. For the description and operation of these serial data communication circuits refer to Data Link Communications Description and Operation .

Control Module

Data Link Type

Diagnostic Procedure

Schematic Reference: Data Communication Schematics

Body Control Module (BCM)

    • High Speed GMLAN
    • Class 2

Electronic Brake Control Module (EBCM)

    • High Speed GMLAN
    • Class 2

Engine Control Module (ECM)

    • High Speed GMLAN
    • Class 2

Inflatable Restraint Sensing and Diagnostic Module (SDM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Instrument Panel Cluster (IPC)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Power Steering Control Module (PSCM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device

Radio

Low Speed GMLAN

Scan Tool Does Not Communicate with Low Speed GMLAN Device

Transmission Control Module (TCM)

High Speed GMLAN

Scan Tool Does Not Communicate with High Speed GMLAN Device

Vehicle Communication Interface Module (VCIM)

Class 2

Scan Tool Does Not Communicate with Class 2 Device