The body control module (BCM) has a bussed electrical center integrated into the housing. Body control relays and fuses are installed directly on the BCM which simplifies wiring and junction blocks on the vehicle. The body control system consists of the BCM and its associated controls. Battery positive voltage is provided to the BCM from the instrument panel (I/P) BATT 2 fuse in the underhood fuse block. The module grounds are wired to ground G201 and G301. The BCM is wired to the class 2 serial data communication bus as well as discrete input and output terminals to control the functions of the vehicles body .
Power Mode Master
This vehicles body control module (BCM) functions as the power mode master (PMM). Refer to Floor Carpet Drying for a complete description of the power mode functions.
Body Control Module
The various body control module (BCM) input and output circuits are described in the corresponding functional areas indicated on the BCM electrical schematics. The BCM functions include the following:
| • | A/C compressor request--Refer to Air Temperature Description and Operation . |
| • | A/C cooling fan--Refer to Air Delivery Description and Operation . |
| • | Battery rundown protection (inadvertent power)--Refer to Interior Lighting Systems Description and Operation . |
| • | Brake fluid level sensing--Refer to Brake Warning System Description and Operation . |
| • | Bulb check--Refer to Instrument Cluster Description and Operation . |
| • | Chimes--Refer to Audible Warnings Description and Operation . |
| - | Check gages |
| - | Door ajar warning |
| - | Headlamps ON |
| - | Key-in-ignition |
| - | Oil reset |
| - | Park brake warning |
| - | Seat belt not fastened |
| - | Turn signal ON |
| • | Door lock interface--Refer to Power Door Locks Description and Operation . |
| • | Electronic steering control (ESC)--Refer to Power Steering System Description and Operation . |
| • | Engine coolant level sensing--Refer to Cooling System Description and Operation . |
| • | Exterior and interior lighting control--Refer to Exterior Lighting Systems Description and Operation . |
| - | Automatic lighting control |
| - | Daytime running lights (DRL) |
| - | Fog lamps |
| - | Park brake lights |
| - | Turn hazard lamps |
| • | Gage control--Refer to Instrument Cluster Description and Operation . |
| • | Horn interface--Refer to Horns System Description and Operation . |
| • | Instrument cluster indicator control--Refer to Instrument Cluster Description and Operation . |
| • | Interior lighting--Refer to Interior Lighting Systems Description and Operation . |
| • | Key-in-ignition sensing--Refer to Audible Warnings Description and Operation . |
| • | Parking brake state sensing--Refer to Brake Warning System Description and Operation . |
| • | Retained accessory power (RAP)--Refer to Retained Accessory Power (RAP) Description and Operation . |
| • | Rear compartment interface--Refer to Power Door Locks Description and Operation . |
| • | Rear defogger--Refer to Rear Window Defogger Description and Operation . |
| • | Remote function control--Refer to Keyless Entry System Description and Operation . |
| • | Seat belt use sensing--Refer to Seat Belt System Description and Operation . |
| • | Theft deterrent--Refer to Theft Systems Description and Operation . |
| • | Washer solvent level sensing--Refer to Wiper/Washer System Description and Operation . |
| • | Wiper/washer--Refer to Wiper/Washer System Description and Operation . |
