Driver or Passenger Seat Back Cushion Finish Panel Replacement Fold Flat

1. Position the seat back in the fold flat position.
2. Remove the screws from the seat back trim panel.
3. Slide the trim panel rearward to disengage the top hook from the seat back.
4. Remove the trim panel from the seat.

1. Position the trim panel to the seat back. Ensure that the top hook is engaged in the seat back.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the screws to the trim panel.

Tighten
Tighten the screws to 1 N·m (9 lb in).

3. Raise the seat back to the upright position.