Front Seat Cushion Outer Trim Panel Replacement Fold Flat

1. Remove the front seat from the vehicle. Refer to Front Seat Replacement - Bucket .
2. Remove the outer trim panel from the seat back recliner. Refer to Front Seat Back Recliner Outer Trim Panel Replacement .



3. Remove the screws from the outer trim panel of the front bucket seat cushion.
4. Remove the outer trim panel from the seat.

1. Install the outer trim panel to the front bucket seat cushion.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the screws to the outer trim panel.

Tighten
Tighten the screws to 1 N·m (9 lb in).




3. Install the outer trim panel to the seat back recliner. Refer to Front Seat Back Recliner Outer Trim Panel Replacement .
4. Install the front seat to the vehicle. Refer to Front Seat Replacement - Bucket .

Front Seat Cushion Outer Trim Panel Replacement Non-Fold Flat

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .
2. Remove the recliner handle by pulling firmly on the handle.



3. For vehicles equipped with 4-way adjustable seats, remove the riser trim handle on the driver side by pulling the handle.



4. Remove the screws from the outer trim panel of the front bucket seat cushion.
5. Remove the outer trim panel.

1. Install the outer trim panel to the front bucket seat cushion.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the screws to the outer trim panel of the front bucket seat cushion.

Tighten
Tighten the screws to 1 N·m (9 lb in).




3. For vehicles equipped with 4-way adjustable seats, install the riser trim handle on the driver side by pushing the handle.



4. Install the recliner handle by pushing firmly on the handle.
5. Install the front seat. Refer to Front Seat Replacement - Bucket .