GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the mirror face. Refer to Outside Rearview Mirror Glass Replacement .

  2. Object Number: 953210  Size: SH
  3. Remove the mirror trim panel by pulling out at the top.

  4. Object Number: 459511  Size: SH
  5. Remove the foam filler.

  6. Object Number: 953235  Size: SH
  7. Disconnect the electrical connector from the mirror wire harness.

  8. Object Number: 953231  Size: SH
  9. Remove the screws from the mirror motor.
  10. Pull the motor electrical harness through the mirror housing.
  11. Remove the mirror motor from the mirror housing.

Installation Procedure


    Object Number: 953235  Size: SH
  1. Position the motor to the mirror housing.
  2. Pull the mirror motor electrical harness through to the inside door panel.
  3. Connect the electrical connector to the mirror wire harness .
  4. Install the mirror motor.
  5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 953231  Size: SH
  6. Install the screws to the mirror motor.
  7. Tighten
    Tighten the mirror motor screws to 3 N·m (27 lb in).

  8. Install the mirror face. Refer to Outside Rearview Mirror Glass Replacement .
  9. Inspect the operation of the mirror.

  10. Object Number: 459511  Size: SH
  11. Install the foam filler.

  12. Object Number: 953210  Size: SH
  13. Install the mirror trim cover by placing the lower portion of the cover behind the trim panel and push in on the top fastener.