Tools Required

1. Press out the input shaft bearing race using the 87 91 204 . Use the 87 92 236 as a base for pressing operation.




Important: Do not score or damage the clutch housing with a screwdriver.

2. Remove the shift control shaft seal with a screwdriver as shown.



3. Tap out the shift control shaft bushing using the 87 91 220 .



4. Tap out the axle seal and discard.




Important: When driving to the differential bearing race, tap equally on the opposite sides of the race to avoid damaging the race bore and seal surface.

5. Tap out the differential bearing race using a punch and hammer