Tools Required

1. Press in the new differential bearing race using the SA9113T and the SA9172G . Use the 87 92 236 as a base for the pressing operation.



2. Install the new axle using the SA9113T and SA9172G .



3. Install the shift control shaft bushing until flush with the inside of the case using the 87 91 220 .



4. Fill the shift control shaft seal lips with grease and drive into the clutch housing using the 87 92 210 and a hammer. The spring side of the seal should face in.



5. Press in the new input shaft bearing race using the 83 90 312 . Use the 83 90 114 and the 87 91 311 as a base for the pressing operation.