GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 892017  Size: SH
  1. Remove mirror glass.

  2. Object Number: 896479  Size: SH
  3. Remove mirror trim panel by pulling out at top.
  4. Remove foam filler.

  5. Object Number: 894266  Size: SH
  6. Disconnect electrical connector from door harness.

  7. Object Number: 891971  Size: MF
  8. Remove attaching nuts securing mirror.
  9. Remove motor from mirror housing.
  10. Unroute wire.

Installation Procedure


    Object Number: 894266  Size: SH
  1. Route electrical connector.
  2. Connect electrical connector.
  3. Install foam filler.
  4. Install motor.
  5. Install three screws and tighten.
  6. Tighten
    Tighten Motor to Mirror Housing Screws to: 3 N·m (27 lb-in)


    Object Number: 892017  Size: SH
  7. Snap mirror glass assembly onto motor.

  8. Object Number: 894266  Size: SH
  9. Install mirror attachment nuts.
  10. Tighten
    Tighten Mirror Attachment Nut to: 10 N·m (89 lb-in)

  11. Install foam filler.

  12. Object Number: 896479  Size: SH
  13. Install mirror trim cover by placing lower portion of cover behind trim panel and push in on top fastener.