GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2001 🢒 L100/L200/LW200 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Insulator

Removal Procedure

    Object Number: 893616 Size: SH
  1. Remove the outer door panel. Refer to Rear Door Outer Panel removal .

    2. Important: Apply only enough tension so that the insulator panel releases from the door structure.

  2. Remove the door insulator panel.

Installation Procedure

    Important: Make sure the attaching points are clean and dry. If the insulator panel has been damaged during removal, it must be replaced.

  1. Install the insulator using the locating holes and position the insulator panel to the structure. Make sure proper alignment is achieved. Improper alignment could cause outer panel misalignment.
  2. Install the outer door panel. Refer to Rear Door Outer Panel installation procedure .