Removal Procedure
- Remove the front seats. Refer to the Front Seat
Removal.
- Remove the center console .Refer to Center console
Removal.
- Remove hinge pillar molding. refer to Hinge Pillar
Trim Removal procedure in this section of the service manual.
- Remove the carpet retainer. Refer to Carpet Retainer
Removal .
- Remove the carpet retaining fastener from the
driver side.
- Observe the carpet cut under the right side of the HVAC module. Continue
to cut the carpet enough to remove the carpet from the HVAC module.
- Remove the carpet from the vehicle.
Installation Procedure
- Cut the replacement carpet in the same location
as the removed carpet.
- Install the front carpet in the vehicle tucking the carpet under the HVAC
module and under the shift rod. Make sure that the carpet is properly placed to prevent
wrinkles.
- Install the driver side carpet retaining fastener.
- Install the hinge pillar. Refer to Hinge Pillar
Trim Installation.
- Install the carpet retainer. Refer to Carpet
Retainer Installation.
- Install the center console. Refer to Center Console
Installation.
- Install the seats. Refer to the Front Seat Installation.