GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Engine 🢒 Engine Electrical 🢒 Instrument Panel Compartment Replacement

Removal Procedure

    Object Number: 896875 Size: SH
  1. Remove the compartment door. Refer to Instrument Panel Compartment Door Replacement .
  2. Remove the compartment lamp assembly by pulling on the lamp plunger.
  3. Disconnect the connector from the lamp assembly.

    4. Object Number: 1230136 Size: SH
  4. Remove the retainer from the back of the compartment.

    5. Object Number: 896914 Size: SH
  5. Remove the electrical connectors from the body control module (BCM).

Installation Procedure

    Object Number: 896914 Size: SH
  1. Install the compartment partially into the opening.
  2. Connect the electrical connectors to the BCM.

    3. Object Number: 896878 Size: SH
  3. Route the glove box lamp wiring harness through the lamp opening. Connect the electrical connector.
  4. Push on the lamp assembly until the assembly clicks into place.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the glove compartment fastener.

    6. Tighten
    Tighten the fasteners to 2.5 N·m (22 lb in).


    Object Number: 1230136 Size: SH
  6. Install the retainer.
  7. Install the compartment door. Refer to Instrument Panel Compartment Door Replacement .