GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Engine 🢒 Engine Mechanical - 2.2L (L61) 🢒 Engine Flywheel Cleaning and Inspection

    Object Number: 412463 Size: SH

    Important: In order to maintain the proper component balance, contact surface taper, and heat transfer, manual transmission flywheels are NOT to be machined.

  1. Clean the flywheel in solvent.

    2. Caution: Wear safety glasses in order to avoid eye damage.

  2. Dry the flywheel with compressed air.

    3. Object Number: 412117 Size: SH
  3. Inspect the manual transmission flywheel for the following:
    4. • Damaged ring gear teeth
    • Loose or improperly positioned ring gear
    • The ring gear has an interference fit onto the flywheel and should be positioned completely against the flange of the flywheel.
    • A scored, grooved or damaged friction surface

    Object Number: 412119 Size: SH
  4. Inspect the automatic transmission flywheel for the following:
    5. • Damaged ring gear teeth
    • Stress cracks around the flywheel-to-crankshaft bolt hole locations
    • Weight saving holes

    Caution: Refer to Shop Practices Caution in the Preface section.


    Object Number: 895481 Size: SH
  1. Clean the flywheel.
  2. Dry the flywheel with compressed air.

    3. Object Number: 894934 Size: SH
  3. Inspect the manual transmission flywheel for the following:
    4. • Damaged ring gear teeth
    • Loose or improperly positioned ring gear
    • The ring gear has an interference fit onto the flywheel and should be positioned completely against the flange of the flywheel.
    • A scored, grooved, or damaged friction surface

    Object Number: 894936 Size: SH
  4. Inspect the automatic transmission flywheel for the following:
    5. • Damaged ring gear teeth
    • Stress cracks around the flywheel-to-crankshaft bolt hole locations and weight saving holes