For 1990-2009 cars only
Removal Procedure
- Remove the brake pipes from the proportioning valve assembly.
- Remove the proportioning valve from vehicle.
Important: After removing brake pipe nuts, do not excessively pull or bend brake pipes away from master cylinder.
Important: Plug open brake pipes to prevent brake fluid loss and contamination.
Installation Procedure
- Position the proportioning valve into the vehicle and tighten the brake pipe nuts.
- Fill the brake fluid reservoir with clean brake fluid up to the MAX mark on reservoir.
- Bleed brakes. Refer to Hydraulic Brake System Bleeding .
Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the brake-to-proportioning valve to 16 N·m
(12 lb ft).
