GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T40-E/4T45-E 🢒 Transmission Control Lever Boot Replacement

Removal Procedure

    Object Number: 893838 Size: SH
  1. Pull the control assembly boot down to disengage the boot from the knob.

    2. Object Number: 893839 Size: SH
  2. Using a screwdriver, remove the control lever knob retainer.
  3. Remove the control lever knob.

    4. Object Number: 893907 Size: SH
  4. Pull up on the control boot until the indicator bezel disengages from the console.
  5. Disconnect the indicator bezel electrical connector.
  6. Remove the bezel and boot.

    7. Object Number: 893886 Size: SH
  7. Disengage the control boot from the indicator bezel from the underside of the bezel.
  8. Remove the boot.

Installation Procedure

    Object Number: 893886 Size: SH
  1. Install the control boot into the indicator bezel.

    2. Object Number: 893907 Size: SH
  2. Install the bezel and boot over the shift lever and connect the indicator bezel electrical connector. Snap the bezel into the console opening.

    3. Object Number: 893839 Size: SH
  3. Install the control lever knob and knob retainer.

    4. Object Number: 893840 Size: SH
  4. Install the control assembly boot onto the knob so the O-ring in the top of the boot is seated in the groove on the bottom of the knob.