GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - 4T40-E/4T45-E 🢒 Transmission Front Mount Replacement

Removal Procedure

    Object Number: 894328 Size: SH
  1. Remove the engine cooling fan attachment bolts.

    2. Caution: Ensure that the vehicle is properly supported and squarely positioned. To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle on the opposite end from which the components are being removed.

  2. Raise the vehicle.
  3. Position the engine cooling fan to allow access to the transaxle mount bolts.

    4. Object Number: 891595 Size: SH
  4. Remove the front transaxle mount through bolt.

    5. Object Number: 891623 Size: SH
  5. Remove the transaxle mount-to-transaxle attachment bolts.
  6. Remove the transaxle mount from the vehicle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 891623 Size: SH
  1. Install the transaxle mount into the vehicle and tighten the bolts.

    2. Tighten
    Tighten the transaxle mounts (front and rear)-to-transaxle bolts to 90 N·m (66 lb ft).


    Object Number: 891595 Size: SH
  2. Install the transaxle mount through bolt.

    3. Tighten
    Tighten the transaxle mount (rear) through bolt to 55 N·m (41 lb ft).

  3. Reposition the cooling fan for installation.
  4. Lower the vehicle from the hoist.

    5. Object Number: 894328 Size: SH
  5. Install the engine cooling fan attachment bolts.

    6. Tighten
    Tighten the engine cooling fan attachment bolts to 4 N·m (35 lb in).