GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Steering 🢒 Steering Wheel and Column 🢒 Multifunction Turn Signal Switch Housing Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the negative battery cable.
  2. Remove the steering wheel. Refer to Steering Wheel Replacement .
  3. Remove the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .

    4. Object Number: 870643 Size: SH
  4. Remove the upper and lower shrouds. Refer to Steering Column Trim Covers Replacement .

    5. Object Number: 891750 Size: SH
  5. Depress the lock tabs on the left and right multi-function levers. Remove the multi-function levers.

    6. Object Number: 928832 Size: SH
  6. Disconnect the housing electrical connectors.

    7. Object Number: 891592 Size: SH
  7. Remove the housing form the steering column.

Installation Procedure

    Object Number: 891592 Size: SH
  1. Slide the bracket onto the column.
  2. Hand tighten the lower bolt until snug.
  3. Hand tighten the upper bolt until snug.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the lower bolt.

    5. Tighten
    Tighten the bolt to 8 N·m (71 lb in).

  5. Tighten the upper bolt.

    6. Tighten
    Tighten the bolt to 8 N·m (71 lb in).


    Object Number: 928832 Size: SH
  6. Connect the ignition housing electrical connectors.

    7. Object Number: 891750 Size: SH

    Important: Ensure that both locking tabs are seated.

  7. Install the multi-function levers.

    8. Object Number: 870643 Size: SH
  8. Install the upper and lower shrouds. Refer to Steering Column Trim Covers Replacement .

    9. Tighten
    Tighten the shroud screws to 4 N·m (35 lb in).

  9. Install the SIR coil. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement .
  10. Install the steering wheel. Refer to Steering Wheel Replacement .
  11. Connect the negative battery cable.