For 1990-2009 cars only
Removal Procedure
- Remove the control head. Refer to CELL LINK 63235 HVAC Control Assembly Replacement .
- Remove the face plate. Refer to HVAC Controller Face Plate/Knobs/Button Replacement .
- Remove the fan switch lever by prying straight off with a small flat-blade screwdriver.
- Using a flat-blade screwdriver lift the retaining barb on top of the switch assembly and pull the switch out of the control head.
Installation Procedure
- Press the fan switch into the control head from the rear until the retaining barb is seated.
- Press the fan switch lever onto the fan switch until seated.
- Install the control head face plate. Refer to HVAC Controller Face Plate/Knobs/Button Replacement .
- Install the control head. Refer to CELL LINK 63235 HVAC Control Assembly Replacement .
