Removal Procedure
- Remove the wheelhouse panel-to-fascia screws.
- Remove the rear wheelhouse panel-to-quarter panel and rocker panel cover
panel push-in retainers.
- Remove the wheelhouse panel.
Slide the top of the wheelhouse panel out of the quarter panel wheelhhouse.
Installation Procedure
- Position the top of the wheelhouse panel to the quarter panel.
- Install the rear wheelhouse panel-to-quarter panel and rocker panel cover
push-in retainers.
Notice: Refer to Fastener Notice in the Preface section.
- Install the wheelhouse panel-to-fascia screws.
Tighten
Tighten the screws to 2.8 N·m (25 lb in).