Removal Procedure
- Open the fuel tank filler door.
- Remove the bolts holding the fuel tank filler door to the quarter panel.
- Remove the fuel tank filler door from the quarter panel.
Installation Procedure
Important: On vehicles equipped with a locking fuel tank filler door, ensure that the latch
seal does not interfere with the lock actuator rod.
- Position the fuel tank filler door latch to the quarter panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolts holding the fuel tank filler door latch to the quarter panel
and tighten.
Tighten
Tighten the fuel tank filler door latch-to-quarter panel screws to 1 N·m
(9 lb in).
- Close the fuel tank filler door checking to ensure that the latch is working
properly.