GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 892408  Size: SH
  1. Open the rear compartment lid.

  2. Object Number: 894189  Size: SH
  3. Remove the 9 applique attaching nuts from the underside of the rear compartment lid.
  4. Disconnect the license plate sockets from the applique.
  5. Remove the applique by raising the reflex upward from the compartment lid.

Installation Procedure


    Object Number: 894189  Size: SH
  1. Position to the rear compartment lid. Visually inspect that the applique is properly positioned to the decklid.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the 9 applique attaching nuts.
  4. Tighten
    Tighten the rear compartment lid applique fasteners to 5 N·m (43 lb in).

  5. Close the rear compartment lid.