Removal Procedure
- Unsnap the sunshade from the sunshade inner retainer
clip.
- Remove the sunshade fasteners and remove the sunshade.
- On the illuminated sunshade, disconnect the sunshade wiring connector.
Installation Procedure
- On illuminated sunshade, connect the sunshade
wiring connector.
Notice: Refer to Fastener Notice in the Preface section.
- Route the wiring harness into the holes and install the sunshade with fasteners.
Tighten
Tighten the sunshade-to-headliner fasteners to 15 N·m (11
lb ft).
- Snap the sunshade into the inner retainer clip.