GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Body and Accessories 🢒 Seats 🢒 Rear Upper Garnish Molding Replacement

Removal Procedure

    Object Number: 896207 Size: SH
  1. Remove the rear seat shoulder belt cover to expose the shoulder belt fastener.
  2. Remove the shoulder belt fastener and the shoulder belt.
  3. Lower the rear seat back.
  4. Route the shoulder belt out of the garnish molding at the access slot.
  5. Remove the garnish molding assembly by pulling gently at the clip locations.

Installation Procedure

    Object Number: 896207 Size: SH
  1. Position the garnish molding to the vehicle.
  2. Install the garnish molding by pushing gently at the clip locations.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the rear seat shoulder belt to the garnish molding.

    4. Tighten
    The fasteners to 35 N·m (26 lb ft).

  4. Install the rear seat shoulder belt fastener cover.
  5. Route the shoulder belt into the garnish molding at the access slot.
  6. Raise the rear seat back.
  7. Ensure proper operation of the rear seat shoulder belt.