Removal Procedure
- Remove the pull door handle. Refer to
Rear Side Door Pull Handle Replacement
.
- Remove the upper trim panel extension. Refer to
Upper Extension Trim Panel Replacement
.
- Using a door trim
panel tool, disengage the door trim panel fasteners.
- Pull up on the door trim panel to loosen the panel from the door structure.
- On vehicles equipped with illuminated door trim panels, disconnect the
door trim panel lamp harness.
- Remove the rear door trim panel.
Installation Procedure
- If the door trim
panel is being replaced with a new panel, transfer the door panel lamp assembly to
the new panel.
- While holding the door trim panel, connect the door lamp illumination
harness.
- Locate the door trim panel over the top of the door structure and push
down to secure the door trim panel to the door structure.
- Push on the door trim panel to secure the door trim panel retainers.
- Install the upper trim panel extension. Refer to
Upper Extension Trim Panel Replacement
.
- Install the pull door handle. Refer to
Rear Side Door Pull Handle Replacement
.