GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 893732  Size: SH
  1. Open rear door.
  2. Unsnap weatherstrip around rear of roof rail and partially remove.

  3. Object Number: 893733  Size: SH
  4. Partially remove weatherstrip in rear door opening.

  5. Object Number: 891940  Size: SH
  6. Remove C-pillar applique screws in door opening.
  7. Remove C-pillar applique by prying up from the door opening area and then rearward to detach from adhesive strips.
  8. Clean old adhesive strips from C-pillar and applique.

Installation Procedure


    Object Number: 891940  Size: SH
  1. Install new adhesive strips to C-pillar.
  2. Install applique to C-pillar by aligning applique to rear of body.
  3. Install applique to C-pillar and install screws.
  4. Tighten
    Tighten C-pillar Applique Fasteners to: 4 N·m (35 lb in)


    Object Number: 893732  Size: SH
  5. Install weatherstrip around rear of roof rail.

  6. Object Number: 893733  Size: SH
  7. Install weatherstrip in rear door opening.
  8. Close door and verify proper seal and alignment.