GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Body and Accessories 🢒 Doors 🢒 Outer Front Energy Absorber Pad Replacement

Removal Procedure

    Object Number: 893757 Size: SH

    Caution: If energy absorber is removed or damaged it must be replaced with a new part. If omitted, the vehicle will not meet federal motor vehicle safety standards (FMVSS), subjecting the retailer to possible civil penalties for making the vehicle inoperative to the FMVSS, and increasing the risk of injury to the vehicle occupants.

  1. Remove the front door outer panel. Refer to Outer Door Panel Replacement Front - Bolt On removal procedure.
  2. Partially remove the front door insulator.
  3. Using a trim tool, remove the energy absorber fastener.
  4. Remove the energy absorber from the door structure.

Installation Procedure

    Object Number: 893757 Size: SH
  1. Remove the tape backing from the new part and affix the energy absorber to the door structure.
  2. Install the energy absorber fastener to the door structure.
  3. Install the front door insulator.
  4. Install the front door outer panel. Refer to Outer Door Panel Replacement Front - Bolt On installation procedure.