Front Door Striker
- Using a grease pencil, mark around the striker for installation purposes.
- Remove the bolts.
- Remove the striker and striker shim if present.
Installation Procedure
- Loosely install the striker and striker shim, if present, with the bolts.
- Align the striker with the marks made prior to removal.
- Hand tighten the bolts.
- Inspect the door closing. Align the striker as required.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the striker bolts.
Tighten
Tighten the door striker bolts to 20 N·m (15 lb ft).