Removal Procedure
- Remove headlamp housing. Refer to "Headlamp Housing"
removal procedure in this section.
- Remove nuts attaching fog lamp bracket to impact bar.
- Remove fog lamp assembly and bracket down through bottom of front fascia.
- Remove fog lamp assembly from fog lamp bracket.
Installation Procedure
- Install fog lamp assembly to fog lamp bracket.
- Place fog lamp assembly and bracket into position through bottom of front
fascia.
- Install two nuts attaching fog lamp bracket to impact bar.
Tighten
Tighten Fog Lamp Bracket-to-Impact Bar Fasteners to: 30 N·m (22 lb ft)
- Install headlamp housing. Refer to "Headlamp Housing" installation
procedure in this section.