Removal Procedure
- Remove the headlamp
housing. Refer to
Headlamp Assembly or Headlamp Bulb Replacement
.
- Remove the nuts attaching the fog lamp bracket to the impact bar.
- Remove the fog lamp assembly and bracket down through the bottom of the
front fascia.
- Remove the fog lamp assembly from the fog lamp bracket.
Installation Procedure
- Install the fog lamp assembly to the fog lamp bracket.
- Place the fog lamp assembly and bracket into position through the bottom
of the front fascia.
Notice: Refer to Fastener Notice in the Preface section.
- Install the 2 nuts attaching the fog lamp bracket to the impact bar.
Tighten
Tighten the fog lamp bracket-to-impact bar fasteners to 30 N·m
(22 lb ft).
- Install the headlamp housing. Refer to
Headlamp Assembly or Headlamp Bulb Replacement
.