GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 L100/L200/LW200 🢒 Engine 🢒 Engine Mechanical - 2.2L (L61) 🢒 Camshaft Cover Installation

    Object Number: 412147 Size: SH
  1. Assemble the camshaft cover and NEW gasket. Ensure that the gasket is located in the retaining groove in the camshaft cover.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the cover on the cylinder head and hand start the bolts.

    3. Tighten
    Tighten the camshaft cover bolts to 10 N·m (89 lb in).


    Object Number: 865364 Size: SH
  3. Install the front lift bracket and bolt.

    4. Tighten
    Tighten the front lift bracket bolt to 25 N·m (18 lb ft).


    Object Number: 865367 Size: SH
  4. Install the rear lift bracket and bolts.

    5. Tighten
    Tighten the rear lift bracket bolts to 25 N·m (18 lb ft).


    Object Number: 412139 Size: SH
  5. Install the ground strap and bolt.

    6. Tighten
    Tighten the camshaft cover ground strap bolt to 10 N·m (89 lb in).


    Object Number: 465982 Size: SH
  6. Install the spark plugs.

    7. Tighten
    Tighten the spark plugs to 20 N·m (15 lb ft).


    Object Number: 412144 Size: SH
  7. Install the ignition coil and module assembly to the cam cover.
  8. Install the cam cover bolts.

    9. Tighten
    Tighten the ignition coil and module assembly bolts to 10 N·m (89 lb in).


    Object Number: 631999 Size: SH
  9. Install the power steering pump and bolts.

    10. Tighten
    Tighten the power steering pump bolts to 25 N·m (18 lb ft).

Installation Procedure

    Object Number: 1013303 Size: SH
  1. Assemble the camshaft cover and gasket. Ensure that the gasket is located in the retaining groove on the camshaft cover.
  2. Install the cover on the cylinder head and hand tighten the bolts.

    3. Object Number: 898895 Size: SH
  3. Install the front lift bracket and tighten the bolts.

    4. Tighten
    Tighten the front lift bracket bolts to 25 N·m (18 lb ft).


    Object Number: 898896 Size: SH
  4. Install the rear lift bracket and tighten the bolts.

    5. Tighten
    Tighten the rear lift bracket bolts to 25 N·m (18 lb ft).


    Object Number: 895199 Size: SH
  5. Install the ground strap.

    6. Tighten

        • Tighten the camshaft cover bolts to 10 N·m (89 lb in).
        • Tighten the camshaft cover ground strap bolts to 10 N·m (89 lb in).

    Object Number: 895073 Size: SH
  6. Install the spark plugs.

    7. Object Number: 894939 Size: SH
  7. Install the ignition coil and module assembly to the cam cover.

    8. Tighten
    Tighten the ignition coil-to-camshaft cover bolts to 8 N·m (71 lb in).

  8. Install the power steering pump, if equipped.

    9. Tighten
    Tighten the power steering pump to 25 N·m (18 lb ft).