How to Inspect the Engine Air Cleaner/Filter
Refer to the
Scheduled Maintenance in this book to determine
when to replace the air filter.
Caution: Operating the engine with the air cleaner/filter
off can cause you or others to be burned. The air cleaner not only cleans the air;
it helps to stop flames if the engine backfires. If it is not there and
the engine backfires, you could be burned. Do not drive with it off, and be careful
working on the engine with the air cleaner/filter off.
Notice: If the air cleaner/filter is off, a backfire can
cause a damaging engine fire. And, dirt can easily get into the engine,
which will damage it. Always have the air cleaner/filter in place when you are driving.
If you want to replace the engine air cleaner/filter yourself, use the following
steps.
- Remove the hose clamp that is on the inlet duct on the cover and pull
off the hose.
- Release the two clips and turn the cover upward to unhook the hinges.
- Pull the air cleaner/filter box cover out and remove
the air filter element from the air filter box. If the element is dirty, you should
replace it. If the element is only dusty, it may be cleaned by blowing compressed
air through it from the clean side. Make sure you are away from your engine compartment
when cleaning the air filter with compressed air.
- Wipe all dust from inside the housing and inspect
the air cleaner and air inlet tube for cracks, cuts and deterioration. The air inlet
tube must be replaced if it is damaged.
- Install the air filter element, hose, hose clamp and cover.
- Latch the two clips.